The HVC80502X X-ray source is an integrated X-ray generator with self-cooling and self-protecting features, with an output of up to 80kV/150W. It is characterized by its compact structure, portable installation, and reliable operation. Within the allowable working temperature range, it can operate continuously at 150W without additional cooling. The HVC80502X X-ray source consists of an X-ray chamber and a control box, and remote control, status monitoring, and firmware upgrades can be achieved via a standard RS232 interface.
Food testing, industrial non-destructive testing, dangerous goods testing and other fields, mostly used for simple X-ray machines or mobile X-ray testing equipment
| Item | Specification |
| Input voltage | 230VAC±10%, 50/60Hz, 2Amps |
| Output power of X ray tube | Max continuous output power 150W（30kV/5mA or 80kV/1.8mA ） |
| Output voltage | Rated output voltage：Continuously adjustable voltage range 20kV—80kV |
| Output voltage ripple：±0.5%（peak to peak） | |
| Output voltage accuracy：±1% of voltage setting value | |
| line regulation：±0.1% | |
| load regulation：±0.1% | |
| Tube current | Rated tube current：Continuously adjustable current range 0.2mA-5.0mA |
| Tube current accuracy：±1% mA of current setting value | |
| line regulation：±0.5% | |
| load regulation：±0.5% | |
| Rise time of output voltage | The kV rise time is <0.4 Sec from 10% to 90% of the output voltage. |
| Filament power supply: | input voltage：24VDC |
| filament voltage：2.0 to 3.0Vac | |
| filament：3.0 to 3.5 Amps RMS | |
| preheating time：3sec | |
| Tube feature | Tube type：fixed anode、 glass envelope 、tungsten target |
| focus：0.8mm | |
| inherent filtration：0.8mm Be，0.7mm AI | |
| radiation angle：80º*16º, fan beam | |
| target angle：25° | |
| Cooling | Transformer oil medium, natural heat dissipation |
| Working temperatures | -10℃—40℃ |
| Storing temperature | -20℃—60℃ |
| System temperature protection | 60±3℃ of oil temperature |
| Humidness | 98%，Non-condensation |
| Weight | 23kg |
| Installation direction | Installation in any direction |
| Radiation angle | 16°×80° |
| X-ray leakage | Less than 0.5mR/hr at 5cm from the surface of the HVC80502 Integrated X-Ray Source. |
JB1/AC~(AC Input Power Connector)
| Pin | Signal | Parameter |
| 1 | L | live wire |
| 2 | N | Neutral line |
| 3 | G | PE |
JB2/COM (DMR-9S interface definitions)
| Pin | Signal | Parameter |
| 1.4.6.7.8.9 | N/C | No connect |
| 2 | TXD | Data transmit |
| 3 | RXD | Data receive |
| 5 | GND | Signal gnd |
JB3/Interlock,(DMR-9P interface definitions)
| Pin | Signal | Parameter |
| 3/4/5/6/7/8/9 | N/C | No connect |
| 1 | Interlock Out | |
| 2 | Interlock In |
Short connect pin1 and pin2 make X ray source normal operation. Typical connection：
Led indicator:
| ID | Color | Meaning |
| XrayOn | Yellow | indicate X ray on |
| ARC | Red | Arcing in oil tank |
| OT | Red | Over temperature |
| EP_Err | Red | Tube voltage error |
| IP_Err | Red | Tube current error |
| Power | Green | Power on |
Tank size
Copyright@2024, All Rights Reserved
