HVP702A1 is a portable dental X-ray imaging device powered by a rechargeable lithium polymer battery pack which can produce X-rays for dental examinations. HVP702A1 consists of X-ray tube assembly, circular beamlimiter, control panel, handheld switch, battery, charging adapter, band, remote exposure switch (optional). The HVP702A1 is an X-ray product that can be combined with imaging sensors or film devices to capture images of the teeth in the patient’s mouth.
HVP702A1 is a portable dental X-ray imaging device that uses imaging sensors in the mouth to acquire images for dental diagnosis.
| Item | Specification |
| Touch the serial screen | Maximum area size: 4.3 “valid |
| Display size (mm) : 95.04 (L)×53.86 (W) | |
| Touch type: R: resistive Ratio: 16:9 |
|
| Resolution: 480×272 | |
| Brightness (nit) : 300 | |
| TFT Type: IPS | |
| Operating voltage (V):4.5-6.0 | |
| Hibernation current (mA) : 0.25 | |
| Operating temperature: -20℃ to +70℃ | |
| Battery | Voltage: 12V (Max 16.8V) |
| Current: 10C (continuous 10A) | |
| Capacity: 2500mA | |
| Maximum operating current: 25A | |
| Battery type: Lithium polymer | |
| Charger | Input voltage: AC100-240V/ Current 1A/ Frequency: 50/60Hz |
| Output voltage: DC16.8V/ Current: 1000mA | |
| Remote exposure interface | Interface: RJ11 less than 300ms |
| Exposure handle | Size: 10cm×3cm |
| Tube voltage [kV] | 70kV |
| Tube current [mA] | 2mA |
| Maximum power output | 140VA |
| Maximum error | Tube current -5% Tube voltage ±5% |
| Minimum focal length | 200mm |
| Maximum service time | 2 seconds (70kV/2mA) |
| Total filtration | 1.8mmAI |
| Cooling time | 30 times the ray opening time |
| Tube current and tube voltage rise time | Within 100ms |
| X-ray tube | Focal point: 0.4mm |
| Target Angle: 12 degrees | |
| Anode heat capacity: 4500J | |
| Natural filtration: min. 0.8mmAI/75kV | |
| X-ray beam area: 70mm at SID 200mm |
Product size
Copyright@2024, All Rights Reserved
